Sealing of water meters in Moscow, registration documents for water meters

Metering devices

Installation of water meters
Why is it necessary to install water meters?

The installation of metering devices is a requirement of Federal Law No. 261-FZ “On energy saving and increasing energy efficiency and on introducing amendments to certain legislative acts of the Russian Federation.” This law came into force on November 23, 2009.

Only devices included in the state register of measuring instruments are allowed for installation, which must be indicated in the passport for the water meter.

What types of metering devices are there?

by appointment:

- household (for apartments, private houses)

— industrial (for apartment buildings, large industrial premises, large structures);

with different nominal diameters:

- 15 mm or ½ "(for an apartment, private house, non-residential premises in an apartment building, shopping pavilion and other objects where the average daily volume of water consumption is less than 9 m 3 per day )

- 20 mm or ¾ " , 25 mm or 1 " , 32 mm or 1¼ " , 40 mm or 1 ½ " , 50 mm or 2 " , etc. ( for apartment buildings, large industrial premises, large structures)

The nominal diameter of the metering device is determined by the design of the metering unit based on the volume of water consumption and the technical characteristics of the water meter (for metering devices with a nominal diameter of more than 15 mm)

temperature resistance:

- for cold water (can be used up to 40 degrees Celsius)

- for hot water (can be used up to 130-150 degrees Celsius)

by accuracy class: A, B, C, D.

The ratio of the minimum and nominal (operating) water flow, i.e. dynamic range, by accuracy class is:

Remember, the higher the level of accuracy of the device, the smaller the error in determining consumption volumes. Keep in mind that deviations (errors) may not be in favor of the subscriber.

How to install a meter?

The owner himself chooses who to contact with a request to install a water meter. Information regarding the installation of a metering device by a specialized organization can be obtained by calling Khimki Vodokanal OJSC 8-495-571-75-11 (general department).

Remember that the installation of the meter should only be trusted to professionals!

Who pays for the installation of metering devices?

In accordance with current legislation, equipping a residential building, residential or non-residential premises with metering devices, putting installed metering devices into operation, their proper technical operation, safety and timely replacement must be ensured by the owner of the premises (residential building).

Commissioning of metering devices

Putting installed metering devices into operation - documenting the metering device as a device, according to the readings of which the amount of payment for utility services is calculated.

The metering device is put into operation:

- on the basis of a written application from the owner of a residential building, apartment or non-residential premises in an apartment building, containing the information established by paragraph 81 of the Rules for the provision of utility services to owners and users of premises in apartment buildings and residential buildings, with a copy of the passport for the metering device and documents confirming the results of passing regular verification (except for new devices), as well as title and reporting documents of the organization that installed the metering device (in the case of work carried out by a specialized organization) and the design of the metering unit with the calculation of the nominal diameter of the metering device (for metering devices with a nominal diameter of more than 15 mm),

- employees of JSC Khimki Vodokanal,

— with the installation of control seals or anti-magnetic seal indicators in order to protect the device from unauthorized interference in its operation,

- no charge.

When carrying out work to commission a metering device, the following must be checked:

— fulfillment of the requirements for the installation location of the metering device;

— correspondence of the serial number on the metering device to the number specified in the passport;

— compliance of the metering device with the technical documentation of the device manufacturer, including the configuration and installation diagram;

— presence of signs of the latest verification (in the metering device passport or in the verification certificate);

Failure of the device to comply with the above requirements is grounds for refusal to put the metering device into operation.

Where to go and what you need to seal water meters

From July 1, 2012, the installation of water meters in an apartment or private house is considered mandatory. If the rules are not followed, homeowners are punished with fines. Installing a water meter, as well as its sealing, is considered an integral process when putting the device into operation. To understand how the procedure occurs, you need to consider where to apply for the service and what documents are needed to implement it:

Who performs the filling? The procedure is carried out by authorized employees of the city water utility company or the organization to which the subscriber pays a monthly fee for resource consumption. This includes municipal enterprises, homeowners' associations or management companies. These organizations have entered into an agreement with the water utility for the possibility of self-sealing when installing or replacing a device. Some utilities exempt themselves from the authority to seal the water meter. They refer consumers to private organizations that provide this service.
What documents are required for filling? Until 2010, management companies required a special license to seal a meter. It gave organizations the authority to seal; today this document has been abolished. In order for the technician to be able to attach a seal to the water meter, it is necessary to provide him with the passport of the metering device at the time of the procedure. When the seal is installed, a company employee must draw up a report on the work done. This act indicates the meter number, the name of the organization, and the date of its sealing. The seal number and technical data of the water meter are also written down here.

If the procedure was carried out according to the rules, the acceptance certificate is signed by two persons - the owner of the apartment and the foreman.

The document is sent to the management company and stored there until the next water meter sealing date.

Who does it

The most common question that arises among apartment owners where water meters need to be sealed is who is involved in this activity. There may be several options:

Management Company;
housing maintenance office;
water utility

To find out exactly how the work is done and where to go for help, you can call the management company’s hotline or visit its website. If it is the management company that is responsible for sealing and checking water meters, then you can leave a request for the service directly on the website. There you need to indicate your address, in particular, the apartment number, as well as your last name. At the appointed hour, the technician will visit the subscriber and take the appropriate actions. At the end of the procedure, the parties must sign the commissioning certificate, since it is prohibited to use an unsealed meter for its intended purpose.

When contacting the DEZ or Housing Office, the actions will be similar. The subscriber calls the specified number, leaves a request and waits for the technician at a certain time. If the city water utility does the sealing, then the procedure is smoother, since the service is provided directly from the resource supplier. Acceptance for use occurs after the subscriber has read all its conditions on the department’s website.

For reference. To agree on the date of acceptance of the metering device, you must call the number provided on the Vodokanal website or appear in person. Each organization has a set work schedule for a technician who will arrive at the appointed time for sealing.

If the sealing was carried out by third-party companies, then the act of putting the water meter into operation must be handed over to the water utility in person. You can write a letter and send it by email, attaching scanned copies or photographs of existing documents.

How much does it cost to seal a water meter?

According to established legislation, the initial sealing of water meters is free of charge. The subscriber does not have to pay anything at the end of the procedure. Several cases where no fee is charged:

if an emergency replacement of pipes and fittings was carried out, which was the reason for resealing the device;
if the meter is new, installed after a device that has expired.

The data is specified in Art. 20 Federal Law “On Water Supply and Sewage”, so if a master tries to take payment for his services, such actions will be considered illegal. There are a number of cases when filling is carried out for a fee. When the seal is broken due to the fault of the apartment owner, it can only be restored for money. Depending on the region and city, this cost can vary from 600 to 2000 rubles. In this case, the service life of the device will be different: for example, old water meters have a longer service life. When answering the question whether you need to pay for a filling, you can first find out about it by phone.

Important. From the moment the application is submitted, an employee of the water utility or management company must put a seal within 15 days. The operator accepts the application, and the day before the master’s visit, calls the subscriber back to confirm his presence in the apartment at the designated time. Work often takes place within 3 days or 1 week, so you won’t have to wait long. For the waiting period, tariffs are carried out according to the regulatory table established by the department.

voennpravo.ru

Find 31 results found. . courier”, February 26, 2021 Residents of the district are increasingly receiving calls and visits from strangers, annoyingly offering to check or replace water meters.

The correspondent of the South-Eastern Courier also encountered this problem. "South-Eastern Courier", February 26, 2021 Incomprehensible. . methods, including directly at home, without shutting off the water shut-off valves.

The cost of calibrating a meter depends on the caliber (diameter) of the water meter, the method of verification and ranges from 1.5 to 3 thousand rubles. depending on the type of meter.

To carry out verification of the water meter. . 11/23/2009, Mosvodokanal OJSC is engaged in the installation and operation of only communal water meters.

Sealing the water meter

Are you in a hurry to seal your water meter?

Want to make sure it works?

And stop overpaying for water? Contact us and get professional supervision of installation of water meters:

We draw up a contract for the provision of services.
We carry out sealing of water meters (see below).
We check the correct installation and integrity of the devices.

Supervised installation is completed by issuing a Certificate of Acceptance of Completed Work and a Certificate of Commissioning of Devices in triplicate. Why us:

We replace and install water consumption meters, performing their repair, service, and warranty service.
We work on the basis of a license to supervise the installation of meters.

Sealing of meters in Moscow

To use resource metering devices, it is important to register them correctly. An integral part of this process is sealing the meter. Only certified specialists representing a licensed company have the right to perform such an operation.

Otherwise, the device readings will not be accepted by utility services or management companies, which risks recalculating tariffs and volumes of consumed resources (water, electricity, gas, heat, etc.).

has everything necessary to provide official replacement, installation and sealing services for meters in Moscow.

Installation of a new meter due to its absence or failure of the old one; When performing verification and identifying mechanical damage to the measuring

Procedure for sealing water meters

A water meter is a metering device that allows you to record the consumption of a resource for a certain period of time. All indicators are recorded in a special receipt or paybook and submitted for payment to centers or management companies. Resource metering is included in the list of utility services, so do not forget about sealing water meters.

Unsealed water meters cannot be used; this is punishable by fines.

Carefully! Mos-Vodokanal Company

Attention! Complaints from Moscow residents about the Mos-Vodokanal company (not to be confused with the official Mosvodokanal company https://www.mosvodokanal.ru) have become more frequent. This company does not have the right to carry out verification of water meters (they do not have an Accreditation Certificate) and the documents issued by it to the owners of water meters are invalid and are not accepted by the MFC.

Also on the website of this company * unofficially (illegally) the state symbols of the Russian Federation and the symbols of the city of Moscow are used. Article 17. 10 of the Code of Administrative Offenses establishes administrative liability for violation of the procedure for the official use of the State Flag of the Russian Federation, the State Emblem of the Russian Federation or the State Anthem of the Russian Federation shall entail the imposition of an administrative fine on citizens in the amount of two thousand to three thousand rubles; on official

Vodokanal sealing of water meters telephone

Often, apartment owners do not know that the service provider seals water meters free of charge; Law 416-FZ confirms this.

Despite the fact that this document gained legal force back in 2013, many management companies continue to illegally demand payment from residents for this service. So it would be useful for tenants and homeowners to learn how to seal the meter in accordance with the legislation in force in Russia. Existing regulatory documents The relationship between the home owner and the service provider organization in terms of water supply, metering of consumed water and payment for it is regulated by the following legislative acts: Federal Law No. 416, adopted on 12/07/2011 and entered into force on 01/01/2013, “On water supply and water disposal"; Law No. 261, introduced on November 23, 2009, “On Energy Saving”;

Order and procedure

Sealing the water meter is necessary in the following cases:

The meter is installed for the first time;
The seal is damaged;
After the next verification;
After water meter repair.

When sealing a water meter, two seals are installed - for hot and cold water. One is enough for a universal counter.

The water meter must have a printed passport. Otherwise the product is invalid. The document contains a serial number. It must be checked against the registered number on the case.

You can install the water meter yourself, or you can call a specialist. Then you need to do the sealing.

How to seal a water meter

First you need to find out which organization is doing the filling in a particular house. The products are sealed by an official organization that supplies water to homes, charges a fee for it and can draw up documentation for the procedure. These are homeowners' associations, water utilities, management companies.

submit applications for sealing of the water meter to the appropriate service;
you will be given a date for installing the filling;
The technician will check the correct installation, the functionality of the water meter, and the availability of documents (passports for the water meter);
sealing the device;
the owner is given an acceptance certificate.

What you will need to apply:

complete information about the person submitting the application, his phone number, passport;
the desired day on which the meter will be put into operation;
water meter serial number;
installation address;
installation data;
readings of the previous meter at the time of installation of the new one;
date of scheduled verification (it is in the passport).

What documents are needed: a copy of the device’s passport (sometimes the original is required), a verification certificate (if the meter is not new, but after the next verification).

It is important to note that if the owner recently purchased an apartment and meters are installed in it, there is no need to do a new seal. Replacement is required when there is no passport and certificates confirming verification and sealing.

When the technician arrives, you need to check the following:

make sure that the specialist came specifically from the service involved in water supply;
ask for a license to perform the procedure;
he should have samples and forms for filling out documents.

When the above has been verified, you can allow the technician to put a seal on the meter. It also checks the integrity of the product.

Filling includes:

diagnostics of equipment, its first launch;
printing installation;
issuing documents.

The installer is responsible for whether the water meter is sealed correctly.

Regulatory acts and documents

There is no separate law on fillings. In 2011, the law “On water supply and sanitation” (Federal Law 416) was adopted; a new version appeared in 2021. The frequency of inspections and sealing periods are regulated by this law.

According to the rules, the homeowner receives a sealing application form and fills it out.

When the application is reviewed by the services, the master arrives. Upon completion of the procedure, he issues an acceptance certificate in two copies - for the owner of the apartment and the organization involved in water supply. The owner must carefully study the act - the basic data must be recorded in it. The documents are then signed by both parties.

What should be stated in the acceptance certificate:

date of filling;
Full name of the inspector who performed the procedure;
company name, contacts;
installation address;
day of inspection, recorded values;
device number, information from the passport;
water supply unit diagram;
serial number of the seal.

Two acts are signed - the first certificate is given to the owner, and the second is transferred to the appropriate service. All information is entered into an electronic database, with the help of which the amount for water supply is then calculated.

Paid or free

According to Federal Law 416, starting from 2021, sealing of water meters is carried out at the expense of companies providing utility services and free of charge for the consumer.

The owner pays only in one case. If the seal is unusable (broken or torn), paid sealing of the meters is carried out. The cost of installation and re-sealing is paid by the party at fault in the incident.

approximate cost

Meters should be installed free of charge. The owner must pay when it is damaged due to his fault. The cost of sealing one meter starts from 300 rubles. The maximum price is 2000 rubles. Accordingly, sealing two devices will cost twice as much. How much it costs to seal a water meter depends on the city of residence and the company providing the service.

JSC Mosvodokanal is the largest water company in Russia

This year marks the 215th anniversary of the Moscow water supply system.

In honor of this memorable date, we decided to turn over the pages of history June 14 June 13 June 11 June 07 June 05 The Company provides high-quality drinking water and a reliable sewage system to 14.2 million people.

residents of the Moscow metropolis.

Single reception telephone: Select your district Eastern AO Western AO Northern AO North-Eastern AO North-Western AO Central AO South-Eastern AO South-Western AO Southern AO REVS No. 11REVS No. 3 Baikalskaya st., 11 Head: Gavrilin Vladislav Evgenievich Telephone dispatch office Telephone number of a single reception: Prokatnaya st., no.

Living spaces

How to install a cold water supply meter in a private residential building, as well as in apartments in multi-apartment buildings, the owners of which have chosen a direct form of management?

It is necessary to conclude an agreement for cold water supply and sanitation with JSC Nizhny Novgorod Vodokanal (if an agreement has not been concluded previously).
Install a water meter yourself or with the help of any organization you choose.
Commission the water meter. To do this, you must submit an application to the Subscriber Relations Center to put the meter into operation.

The application contains the following information:

information about the consumer (last name, first name, patronymic, details of an identity document, contact phone number);
proposed date and time of commissioning of the installed metering device;
type and serial number of the installed metering device, location of its installation;
information about the organization that installed the metering device;
meter readings at the time of its installation;
date of next verification.

The application is accompanied by a copy of the passport for the metering device, as well as copies of documents confirming the results of the last verification of the metering device (with the exception of new metering devices).

When is it necessary to seal the meter?

The law requires sealing to be carried out in the following cases:

Initial installation.
End of service life of the water meter.
The device has become faulty.
The ball valve was broken.
The integrity of the water meter was accidentally compromised.
Replacement of valves and taps responsible for water supply is required.
There was an accident.
Initially, there was no seal, and there was no passport for the metering device.

During the initial installation, the technician from the management company fills out all the paperwork for the water meter, and if he has the appropriate authority, he seals it. If the plumber does not have the right to seal the meter, then after installing it, they call an inspector from the city water utility. The technician carefully inspects the device for correct installation, then places a seal.

When the meter's service life comes to an end, it is also important to seal it. To do this, the water meter must be replaced or verified. These actions are carried out by a representative of the water utility or the relevant organization. The water meter is checked on site or dismantled and taken to a service center. After installing the device, a seal is made in its place.

Non-residential premises

How to install a metering device in a non-residential premises, including as part of an apartment building?

Install the metering unit.
To commission a metering device, it is necessary to submit an application to the Subscriber Relations Center for commissioning of a metering device in a non-residential premises of an apartment building.

Attention!

The metering device is put into operation only on the basis of a cold water supply and sanitation agreement concluded with JSC Nizhny Novgorod Vodokanal.

The application contains the following information:

information about the consumer (for an individual - last name, first name, patronymic, details of an identity document, contact telephone number, for a legal entity - name (company name) and place of state registration, contact telephone number);
proposed date and time of commissioning of the installed metering device;
address of the premises in which the meter is installed.

How to install a metering device in a non-residential premises that is not part of an apartment building?

Submit an application to the Subscriber Relations Center for the issuance of technical specifications for the design of a metering unit.
In accordance with the received technical specifications, develop design documentation for the metering unit.
In accordance with the project developed on the basis of technical specifications, install the metering unit.
In order to authorize the metering unit for operation, it is necessary to submit an application to the Subscriber Relations Center for admission to the metering unit for operation.

Attention!

Admission of the metering unit to operation is carried out only on the basis of a cold water supply and sanitation agreement concluded with JSC Nizhny Novgorod Vodokanal.

The application contains the following information:

information about the consumer (for an individual - last name, first name, patronymic, details of an identity document, contact telephone number, for a legal entity - name (company name) and place of state registration, contact telephone number);
information about the facility where the metering device is installed (address, purpose, contract number, source of water supply, average daily volume of water consumption);
proposed date and time of commissioning of the installed metering device.

Attached to the application:

a copy of the passport for the metering device;
copies of documents confirming the results of the last verification of the metering device (with the exception of new metering devices);
a copy of the design documentation for the equipment of the metering center certified by the subscriber or transit organization;
a document confirming the right of a person to sign an application and/or submit an application on behalf of the subscriber (power of attorney).

Design documentation for metering station equipment

In accordance with Decree of the Government of the Russian Federation dated September 4, 2013 No. 776 “On approval of the Rules for organizing commercial metering of water and wastewater,” the design of a metering unit is carried out on the basis of technical specifications. Application for the issuance of technical specifications for the design of a metering unit.

The following documents must be attached to the application:

calculation of volumes of consumed water (discharged wastewater)/table of hourly costs for 14 days;
facility layout/floor plan;
network laying diagram/diagram of existing networks;
a copy of the connection conditions;
act of delimitation of operational or balance sheet ownership (if any);
a copy of the explanatory note on the facility/information about the fire extinguishing system and information about the source of hot water supply.

Documents are provided in one copy.

After receiving the technical specifications for the design of a metering unit, it is necessary to complete the design documentation for the metering unit in accordance with the issued technical conditions. The result of designing a metering unit is design documentation.

The design documentation for the metering station equipment must contain:

indication of the location of the metering unit;
installation diagram (connection) of the metering device and other components of the metering unit to water supply and sewerage networks;
information about the type of metering device used and information confirming its compliance with the requirements of the legislation of the Russian Federation on ensuring the uniformity of measurements.

Technical specifications for the design of a metering unit are issued within 10 working days from the date of receipt of an application for the issuance of technical specifications from the subscriber.

10 working days after submitting an application for the issuance of technical specifications for the design of a metering unit, you need to contact JSC Nizhny Novgorod Vodokanal at the address st. Politboytsov, 21a and receive a response to your application.

Documents provided for the issuance of technical specifications are drawn up in accordance with the requirements of regulatory documents.

Existing regulatory documents

The relationship between the homeowner and the service provider in terms of water supply, metering of consumed water and payment for it is regulated by the following legislative acts:

Federal Law No. 416, adopted on December 7, 2011 and entered into force on January 1, 2013, “On water supply and sanitation”;
Law No. 261, introduced on November 23, 2009, “On Energy Saving”;
Federation Government Decree No. 167, in force since 1999, approving the rules for the use of water supply and wastewater disposal;
the same, No. 354 of May 6, 2011, is a set of rules for the provision of public services.

When is meter sealing required?

Most townspeople installed water meters long ago and sealed them. But there are situations when re-filling is required.

It is not advisable to install the devices yourself, since before sealing and registration you must present documents from an organization that has the right to carry out this work.

At the moment, water meters are changed and re-sealed if:

The service life of the devices has expired;
water meters failed prematurely;
the ball valve has failed;
the water meter was accidentally damaged;
pipes, valves and other elements of water supply systems were changed;
after an accident in the water supply system;
after purchasing or exchanging an apartment.

That is, it is necessary to seal meters in any situation where they have been changed or damaged due to mechanical impact.

What is a seal and why is it on the meter?

The metering device is considered officially valid only after sealing. The seal protects against illegal access. It is a round seal of small diameter, usually no more than 3 cm. It is made of metal and plastic. Magnetic seals or tapes for the water meter can also be used. Special standards regulate what the seal on the water meter should look like.

Varieties:

Mechanical lead seals consist of a lead plate with a hole for a wire.
Mechanical plastic fillings are lightweight and sometimes melt when exposed to high temperatures.
Rotary locks are a more complex type of seal with laser engraving.
Antimagnetic seals-stickers. The design is applied to the sticker using paint containing metal particles. If you bring a magnet to the counter, the drawing will “float”, and this can no longer be corrected.

Sealing water meters allows organizations responsible for water supply to secure the readings of water meters and make them reliable.

How to seal a meter

The Law on Ensuring Uniform Measuring Instruments says that the use of unsealed water meters is prohibited. The rules for installing water meters are regulated by regulatory documents, according to which, first of all, it is necessary to write an application to the DEZ service or the local water utility about the desire to seal the water metering device. The application contains the following information:

information about the consumer (for an individual - last name, first name, patronymic, details of an identity document, contact telephone number, for a legal entity - name (company name) and place of state registration, contact telephone number);
proposed date and time of commissioning of the installed metering device;
type and serial number of the installed metering device, location of its installation;
information about the organization that installed the metering device;
meter readings
date of next verification.

The application is accompanied by a copy of the passport for the metering device , as well as copies of documents confirming the results of the last verification of the metering device (with the exception of new metering devices). Then everything happens according to the following scenario:

A technical inspector comes to the apartment and checks the presence of a passport for the meter and the manufacturer’s seal on it.
If everything is fine, then the meter is sealed with a water utility seal.
the technical inspector issues a Certificate of acceptance of the meter into operation, which indicates the following information: date of sealing;
Full name of the inspector and subscriber;
address of the apartment or house where the meter was installed;
brand, number and diameter of the meter;
meter readings at the time of inspection, date of inspection and date of the planned next inspection;
diagram of the water distribution unit;
numbers of all installed seals;

each party signs the Certificate of Acceptance of Water Meters in two copies, one of which remains with the subscriber, and the second is sent to the water utility;

After the Act is signed, the computer data about the subscriber

ATTENTION! The fact of installation of the metering device is established in clause 81 of Section 7 of the Decree of the Government of the Russian Federation of May 6, 2011 No. 354 “On the provision of utility services to owners and users of premises in apartment buildings and residential buildings,” which states that the commissioning of the installed metering device , that is, the documentation of the metering device as a metering device, according to the readings of which the amount of payment for utility services is calculated, is carried out by the contractor on the basis of an application from the owner of a residential or non-residential premises submitted to the contractor.

If the old meter in your apartment has expired or you want to install a new meter, but you need to call Mosoblvodokanal at +7−495−640−99−76 (opening hours Monday-Friday from 9.00 to 18.00) or to your district office Vodokanal.

It will also be useful to read reviews about water meters before choosing.

Statement

I, ________________________________, the owner of apartment No.____, live in a house serviced by your organization. As a provider of services for the maintenance of common property, your organization, regardless of the form of ownership and organizational and legal form, is obliged to provide the consumer with services that meet the quality requirements of mandatory standards, sanitary rules and regulations, established standards and terms of the contract, as well as information about housing services.

I fulfill my obligations under the contract regularly and pay for services for the maintenance of common property.

I have hot and cold water meters installed in my apartment (indicate address). I ask you to come at the time agreed with me by phone (indicate phone number), check the meters, seal them, draw up an act of acceptance of hot water and hot water meters into operation and register them for commercial registration.

Based on Art. 5 Federal Law No. 416 “On Water Supply”, sealing must be done free of charge. Also, in accordance with subparagraph “y” of paragraph 31 of the “Rules for the provision of utility services to owners and users of premises. ", approved by Decree of the Government of the Russian Federation dated May 6, 2011 No. 354, the contractor is obliged to commission the installed individual metering device, as well as begin calculating the amount of payment for utility services based on its readings starting from the first day of the month following the month of commissioning metering device into operation.

In accordance with the requirement of clause 31 (k) of the Decree of the Government of the Russian Federation “On the provision of utility services to owners and users of premises in apartment buildings and residential buildings” dated May 6, 2011 N 354, I ask you to send a notification to my address within three working days acceptance of the application for consideration, indicating the date and topic of the application.

"__"_____________20___ Ivanov I.I.

If the demand for payment for sealing is unlawful, two copies of the complaint should be made. One of them is sent to the head of the relevant organization, and the second is taken into account when going to court as evidence of the plaintiff’s compliance with the pre-trial procedure for resolving the dispute.

Is it necessary to seal the water meter?

Most citizens have installed devices in their apartments and houses that measure resource consumption (water and electricity). Legally installed technical equipment must have a seal. Sealing prevents interference with the operation of the meter. Replacement of meters and seals is carried out in the following cases:

Expiration date of the device. The date of manufacture of the product is indicated on the case and in the passport. The service life is counted from this moment, and not from the date of installation of the meter.
Failure of the metering device;
Ball valve failure;
Accidental damage to the water meter;
Required replacement of valves, pipes, taps that make up the water supply system;
Accidents. The seal is replaced after the emergency situation has been eliminated;
When the seal was not initially installed and there are no corresponding passports for water meters.

The filling is considered valid if it is carried out properly. Charging for consumed resources is carried out in accordance with the indications. If there is no seal, payment is made at fixed rates.

If there is no filling

If there is no seal, there will be no penalties for the homeowner. You just have to pay not according to the meter, but according to the standard tariff.

If you pay according to the readings of the meter, then during subsequent verification you may encounter other problems. The actual absence of a seal (subject to its availability according to the documentation) will be regarded as illegal interference with the operation of the device. The operation of the device will be completed, and the owner will have to pay a large amount. The new calculation will take into account the capacity of the water supply system and the round-the-clock use of the meter from the moment of intervention until the day the problem is eliminated. If the date is not set, the recalculation will be made from the last check.